Collection   中文版   English
NEWS CENTER
News Center
Position:Index > 新闻中心 > news
Guangrui cleaner production publicity
2021/6/16 9:57:38   Source::Huixian auto parts   Author :admin   Hits:1857
 In order to improve economic benefits and reduce pollutant emissions, our company started the first round of cleaner production audit in May 2021, and entrusted Xinxiang Zhengjia Certification Consulting Service Co., Ltd
The company provides technical guidance for audit work.
According to the Cleaner Production Promotion Law of the people's Republic of China, cleaner production audit measures (Order No. 38 of the national development and Reform Commission and the Ministry of environmental protection) and cleaner production audit implementation rules of Henan Province
According to the requirements of the document (yfghzz [2018] No. 161), the basic situation of the company's cleaner production enterprises and the status of production and pollution discharge are now publicized to the public, and all sectors of the society are invited to carry out the clean production of our company
Supervise the production audit.
1、 Basic information of enterprise
Company name: Henan Guangrui Auto Parts Co., Ltd
Time of establishment: 2003
Legal representative: Guo Fayin
Address: Chengxi Industrial Park, Huixian industrial cluster, Xinxiang, Henan Province
2、 Basic information of the enterprise
At present, the company mainly produces automobile steering gear. The main raw materials include pig iron, scrap steel, pulverized coal, bentonite, water-based paint, raw sand, inoculant, etc. among them, the consumption of pig iron and scrap steel is relatively large, and the annual output is relatively high
It consumes about 60000 tons and is the main raw material for the production of automobile steering gear.
3、 Introduction and treatment of sewage
Exhaust gas:
The waste gas pollutants discharged by the company are the particles produced by the smelting section, molding section and sand falling treatment process, which are discharged through the 18m exhaust funnel. The particulate emission concentration is about
15 mg / m3, and the annual emission is 1.3 T / A.
DA001 melts the exhaust gas outlet, and the particle concentration is 2.8mg/m ³;
 Da002 molding waste gas + sand treatment waste gas outlet 1, the particle concentration is 2.1mg/m ³;
 DA003 molding waste gas + sand treatment waste gas outlet 2, the particle concentration is 2.8mg/m ³;
 DA004 molding waste gas + sand treatment waste gas outlet 3, the particle concentration is 2.5mg/m ³;
 The concentration of triethylamine is 2.6mg/m ³;
 DA006 core making waste gas + sand treatment waste gas outlet, the particle concentration is 3.6mg/m ³;
 Da007 pouring exhaust outlet 1, the particle concentration is 3.5mg/m ³;
 DA008 pouring exhaust outlet 2, the particle concentration is 3.3mg/m ³;
 DA009 pouring exhaust outlet 3, the particle concentration is 3.5mg/m ³;
 Da010 pouring exhaust gas outlet 4, the particle concentration is 3.4mg/m ³;
 DA011 pouring exhaust gas outlet 5, the particle concentration is 3.9mg/m ³;
 Da012 sand treatment waste gas outlet 1, the particle concentration is 3.8mg/m ³;
 Da013 sand treatment waste gas outlet 2, the particle concentration is 4.5mg/m ³;
 Da014 sand treatment waste gas outlet 3, the particle concentration is 4.2mg/m ³;
 DA015 sand treatment waste gas outlet 4, the particle concentration is 4.1mg/m ³;
 Da016 sand treatment waste gas outlet 5, the particle concentration is 23.9mg/m ³;
 Da017 cleans the exhaust gas outlet 1, and the particle concentration is 3.2mg/m ³;
 Da018 cleans the exhaust gas outlet 2, and the particle concentration is 3.5mg/m ³;
 DA019 cleans the exhaust gas outlet 3, and the particle concentration is 2.9mg/m ³;
 Da020 cleans the exhaust gas outlet 4, and the particle concentration is 3.1mg/m ³;
 Da021 cleans the exhaust gas outlet 5, and the particle concentration is 4.5mg/m ³;
 DA022 cleans the exhaust gas outlet 6, and the particle concentration is 2.7mg/m ³;
 Da023 cleans the exhaust gas outlet 7, and the particle concentration is 2.4mg/m ³;
 DA024 cleans the exhaust gas outlet 8, and the particle concentration is 2.9mg/m ³;
 Da025 cleans the exhaust outlet 9, and the particle concentration is 5.2mg/m ³;
 Da026 coating exhaust gas outlet 1, the particle concentration is 2.8mg/m ³;
 The concentration of benzene, BTEX, NMHC and TVOC in da027 coating exhaust gas outlet 2 is 2.6mg/m ³;
 Noise:
It mainly comes from the operation noise of drilling machine, shot blasting machine, lathe and other equipment in the production process. The noise can be reduced by means of noise elimination, vibration reduction, plant sound insulation and other methods. 1 m outside the factory boundary, the test result is daytime
3-56.9db, 41.2-48.4db at night.
Waste water:
Domestic sewage is collected in septic tank and then enters the sewage treatment plant through municipal sewage pipe network.
The solid waste generated by the company's project includes waste sand, smelting slag, waste engine oil and waste cutting fluid. The waste sand is about 400 t / A, and the smelting slag is about 1200 T / A, which is used by the company
. Waste engine oil and cutting fluid are hazardous wastes. The company has a temporary storage room for hazardous wastes, which is supervised by a specially assigned person, and is managed by Xinyang JINRUILAI Environmental Technology Co., Ltd
Transfer and dispose properly.
The company implements environmental risk prevention and control measures in accordance with the law, and the main posts are managed by special personnel.

  • Passenger car steering system

  • Passenger car steering systems

  • Passenger car steering systems

  • Passenger car steering systems

  • Passenger car steering systems

  • Passenger car steering systems

  • Passenger car steering systems

  • Passenger car steering systems

  • Passenger car steering systems

  • Passenger car steering systems
Index | Legal claim | Links | Statistics | Contact
Copyright:HeNan GuangRui Automotive Parts Co.,Ltd   ICP:豫ICP备15016203号-1